Latest Documents

This Performance-Based Test Guideline (PBTG) describes in vitro assays, which provide the methodology for human recombinant in vitro assays to detect substances with estrogen receptor binding affinity (hrER binding assays). It comprises two mechanistically and functionally similar test methods for the identification of estrogen receptor (i.e. ERα) binders and should facilitate the development of new similar or modified test methods. The two reference test methods that provide the basis for this PBTG are: the Freyberger-Wilson (FW) In Vitro Estrogen Receptor (ER) Binding Assay Using a Full Length Human Recombinant ERα, and the Chemical Evaluation and Research Institute (CERI) In Vitro Estrogen Receptor Binding Assay Using a Human Recombinant Ligand Binding Domain Protein. This assay measures the ability of a radiolabeled ligand ([3H]17β-estradiol) to bind with the ER in the presence of increasing concentrations of a test chemical (i.e. competitor).  Test chemicals that possess a high affinity for the ER compete with the radiolabeled ligand at a lower concentration as compared with those chemicals with lower affinity for the receptor. This assay consists of two major components: a saturation binding experiment to characterise receptor-ligand interaction parameters and document ER specificity, followed by a competitive binding experiment that characterises the competition between a test chemical and a radiolabeled ligand for binding to the ER. These test methods are being proposed for screening and prioritisation purposes, but also provide mechanistic information that can be used in a weight of evidence approach.

The present Key Event based Test Guideline addresses the human health hazard endpoint skin sensitisation, following exposure to a test chemical. Skin sensitisation refers to an allergic response following skin contact with a tested chemical, as defined by the United Nations Globally Harmonized System of Classification and Labelling of Chemicals (UN GHS). This Test Guideline is proposed to address a Key Event leading to skin sensitisation, namely keratinocyte activation. This Key Event on the Adverse Outcome Pathway (AOP) leading to skin sensitisation takes place in the keratinocytes and includes inflammatory responses as well as gene expression associated with specific cell signalling pathways such as the antioxidant/electrophile response element (ARE)-dependent pathways. This Test Guideline provides three in vitro test methods addressing the same Key Event on the AOP for skin sensitisation: (i) the ARE-Nrf2 luciferase KeratinoSens™ test method, (ii) the ARE-Nrf2 luciferase LuSens test method and (iii) the Epidermal Sensitisation Assay – EpiSensA. The KeratinoSens and the Lusens are in vitro ARE-Nrf2 luciferase-based test methods and the EpiSensA is based on gene expression quantification using Reverse Transcription- quantitative PCR in reconstructed human epidermis models. The proposed test methods are used for supporting the discrimination between skin sensitisers and non-sensitisers in accordance with the UN GHS. Performance standards have been developed to enable the validation of similar test methods.

The Local Lymph Node Assay: BrdU-ELISA (LLNA:BrdU-ELISA) is a non-radioactive modification to the LLNA method for identifying potential skin sensitizing test substances and measuring the proliferation of lymphocytes they induce in the auricular lymph nodes. The method described in mouse  is based on the use of measuring 5-bromo-2-deoxyuridine (BrdU) content, an analogue of thymidine, as an indicator of this proliferation. A minimum of four animals is used per dose group, with a minimum of three concentrations of the test substance, plus a concurrent negative control group and a positive control group. The experimental schedule is during 6 days. Thereafter, the animals are killed and a single cell suspension of lymph node cells (LNC) is prepared. The procedure for preparing the LNC is crucial, in particular for the small lymph nodes in NC animals. Then the BrdU content in DNA of lymphocytes is measured by ELISA using a commercial kit of by Flow Cytometry (FCM). This study includes: measurements (weighing, BrdU) and clinical daily observations. The results are expressed as the Stimulation Index (SI) obtained by calculation from the mean BrdU labelling index. The SI should be ≥1.6 for the ELISA method or ≥2.7 for the FCM method for identifying the test material as a potential skin sensitizer.  

The present Key Event based Test Guideline (TG) addresses the human health hazard endpoint skin sensitisation, following exposure to a test chemical. More specifically, it addresses the activation of dendritic cells, which is one Key Event on the Adverse Outcome Pathway (AOP) for Skin Sensitisation. Skin sensitisation refers to an allergic response following skin contact with the tested chemical, as defined by the United Nations Globally Harmonized System of Classification and Labelling of Chemicals (UN GHS). This TG provides three in vitro test methods addressing the same Key Event on the AOP: (i) the human cell Line Activation Test or h-CLAT method, (ii) the U937 Cell Line Activation Test or U-SENS and (iii) the Interleukin-8 Reporter Gene Assay or IL-8 Luc assay. All of them are used for supporting the discrimination between skin sensitisers and non-sensitisers in accordance with the UN GHS. Test methods described in this TG either quantify the change in the expression of cell surface marker(s) associated with the process of activation of monocytes and DC following exposure to sensitisers (e.g. CD54, CD86) or the changes in IL-8 expression, a cytokine associated with the activation of DC. In the h-CLAT and U-SENS assays, the changes of surface marker expression are measured by flow cytometry following cell staining with fluorochrome-tagged antibodies. In the IL-8 Luc assay, the changes in IL-8 expression are measured indirectly via the activity of a luciferase gene under the control of the IL-8 promoter. The relative fluorescence or luminescence intensity of the treated cells compared to solvent/vehicle control are calculated and used in the prediction model, to support the discrimination between sensitisers and non-sensitisers.

This Test Guideline describes an in vitro assay that may be used for identifying water soluble ocular corrosives and severe irritants as defined by the UN Globally Harmonized System of Classification and Labelling, Category 1. The assay is performed in a well where a confluent monolayer of Madin-Darby Canine Kidney (MDCK) is used as a separation between two chambers. It uses a fluorescein dye as marqueur. The test substance has the potential to impair the junctions of the MDCK cells and thus to increase the monolayer¡¯s permeability. Consequently the fluorescein passes through the monolayer and the fluorescein leakage (FL) increases. The FL is calculated as a percentage of leakage relative to both a blank control and a maximum leakage control. The concentration of test substance that causes 20% FL (FL20, in mg/mL) is calculated and used in the prediction model for identification of ocular corrosive and severe irritants. The cut-off value of FL20 to identify water soluble chemicals as ocular corrosives/severe irritants is ¡Ü 100mg/mL. The FL test method should be part of a tiered testing strategy.

The in vitro micronucleus test is a genotoxicity test for the detection of micronuclei in the cytoplasm of interphase cells. Micronuclei may originate from acentric chromosome fragments (i.e. lacking a centromere), or whole chromosomes that are unable to migrate to the poles during the anaphase stage of cell division. The assay detects the activity of clastogenic and aneugenic test substances in cells that have undergone cell division during or after exposure to the test substance. This Test Guideline allows the use of protocols with and without the actin polymerisation inhibitor cytochalasin B. Cytochalasin B allows for the identification and selective analysis of micronucleus frequency in cells that have completed one mitosis, because such cells are binucleate. This Test Guideline also allows the use of protocols without cytokinesis block provided there is evidence that the cell population analysed has undergone mitosis.   

This Test Guideline describes a cytotoxicity-based in vitro assay that is performed on a confluent monolayer of Statens Seruminstitut Rabbit Cornea (SIRC) cells, cultured on a 96-well polycarbonate microplate. After five-minute exposure to a test chemical, the cytotoxicity is quantitatively measured as the relative viability of SIRC cells using the MTT assay. Decreased cell viability is used to predict potential adverse effects leading to ocular damage. Cell viability is assessed by the quantitative measurement, after extraction from the cells, of blue formazan salt produced by the living cells by enzymatic conversion of the vital dye MTT, also known as Thiazolyl Blue Tetrazolium Bromide. The obtained cell viability is compared to the solvent control (relative viability) and used to estimate the potential eye hazard of the test chemical. A test chemical is classified as UN GHS Category 1 when both the 5% and 0.05% concentrations result in a cell viability smaller than or equal to (≤) 70%. Conversely, a chemical is predicted as UN GHS No Category when both 5% and 0.05% concentrations result in a cell viability higher than (>) 70%.